APC 66123 Manuel d'installation télécharger pdf (Page 5)

3402230800/AC - 5

The Network Management Card & Modbus/Jbus (66123) can be hot-plugged in MGE

Galaxy

7000

equipped with a Minislot. It is not necessary to shutdown the UPS, disconnect the load or restart the UPS.

◗ Note the MAC address of the card before inserting it.

◗ Insert and secure the card with the screws.

◗ Connect the ETHERNET cable.

◗ Check the ETHERNET port indications.

◗ Wait until the UPS Data LED flashes regularly (approx. two minutes), indicating that card start-up has

terminated correctly.

Note. Connection detection continues until the card has been connected to the network. Once connection is

made, card start-up continues.

Once the card has started, proceed as indicated below.

◗ Connect the serial cable to card’s service port and PC’s COM port

◗ Use a terminal emulator such as HyperTerminal

with these settings

"Echo typed characters locally" option: disabled

◗ Type MGEUPS (or mgeups).

The main configuration menu is displayed:

IP SETTINGS

Bits per second Data bits Stop bits Parity Flow control

9600 8 1 none none

APC by Schneider Electric

Network Management Card & Modbus/Jbus

Release : AB.build_5_0_7

1 : Reset

2 : Network configuration

3 : Set Login Password to Default

4 : Return to Default Configuration

5 : Jbus configuration

6 : Sensor configuration

0 : Exit

ETHERNET

UPS

Settings

/Sensor

66103

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

APC 66123 Manuel d'installation Page 5