User Manual Rack LCD Console2
Safety
SAVE THESE INSTRUCTIONS!
This manual contains important instructions that must be followed during installation, operation,
and maintenance of the device.
Regulatory agency approval
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the installation guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own
expense.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Consult your power company if you are unsure if your power source is compatible with the
device requirements..
• The device is designed to use with IT power distribution systems with up to 230V phase-to-
phase voltage.
• Do not overload the AC branch circuit that provides power to the rack.
• To prevent damage, make sure all devices are properly grounded.
• The device is equipped with a 3-wire grounding type plug. Have an electrician update your
outlet if the plug does not fit. Do not attempt to defeat the grounding plug.
• Do not exceed the total ampere rating of extension cords if used. Make sure extension cords
or power strips are properly grounded.
• Protect the system from sudden changes in electrical power with a surge suppressor or
uninterruptible power supply (UPS).
Failure to follow these instructions will result in death or serious injury.
CAUTION
HAZARDS RESULTING FROM MISUSE
• Route the power cord and cables so they cannot be stepped on or tripped over.
• Avoid injury and equipment damage as a result of rack failure. Read and adhere to the
installation and safety instructions that accompany your racks
• Never lean on the device.
• Slide rail mounted equipment is not to be used as a shelf or a work space. Do not set objects
on the device.
• Serious damage will result if the device is dropped or falls.
• Do not block ventilation openings. The Rack LCD Console requires proper air
flow for safe operation.
• Do not place the device near or over radiators or heat registers.
• The rack ambient temperature should be not greater than 104°F (40°C).
• Do not use the device near water. Do not spill any liquid on the device.
• Do not use liquid or aerosol cleaners. Clean the device with a damp cloth.
• Use only the hardware provided to install the Rack LCD Console in the rack.
Failure to follow these instructions can result in injury or equipment damage.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels