APC AR2105BLK Fiche technique télécharger pdf (Page 19)

NetShelter VX 25U Enclosure 15

Vertical Mounting Rails

The vertical mounting rails are factory-installed in the proper position for use with rack-mountable

equipment that has a depth of 29.13 inches (740 millimeters).

To accommodate different rails or equipment with various

depths, you can adjust each rail from front to rear over a

range of 2.35 inches (60 millimeters).

How to adjust the mounting rails on the frame posts

1. Use the 5-mm hex wrench (provided) to loosen—but not remove—the four pan-head screws in

the slots of each vertical mounting rail.

2. Slide the rails forward or rearward. Use a level to make sure each mounting rail is vertical.

Tighten each screw.

2.35 in.

(60 mm)

Warn

To avoid personal injury or damage to the enclosure, perform this procedure with

no equipment installed on the vertical mounting rails.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Pas de commentaire

APC AR2105BLK Fiche technique Page 19