APC RAID Subsystem SCSI-SATA II Manuel d'utilisateur Page 54

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 105
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 53
- 53 -
Figure 4.4.6.3
1. Select “/ Volume configuration / Virtual disk”.
2. Click “Create”.
3. Input a VD name, choose a RG Name and enter a size for this VD; decide the
stripe height, block size, read / write mode, /jointfilesconvert/268713/bg rate, and set priority, finally click
“Confirm”.
4. Done. A VD has been created.
5. Follow the above steps to create another VD.
Figure 4.4.6.4
(Figure 4.4.6.4: Creating VDs named “VD-R5-1” and “VD-R5-2” from RAID group “RG-R5”, the
size of “VD-R5-1” is 50GB, and the size of “VD-R5-2” is 64GB. There is no LUN attached.)
Step 3: Attach a LUN to a VD.
There are 2 methods to attach a LUN to a VD.
1. In “/ Volume configuration / Virtual disk”, check the gray button next to the
VD number; click “Attach LUN”.
2. In “/ Volume configuration / Logical unit”, click “Attach”.
RAG362
Vue de la page 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 104 105

Commentaires sur ces manuels

Pas de commentaire