Apc Network Management Card AP9617 Manuel d'utilisateur télécharger pdf (Page 14)

Quick Configuration

Local access to

the control

console

You can use a local computer, a computer that connects to the

Management Card through the serial port at the Management

Card’s UPS or expansion chassis, to access the Control

Console.

1. Select a serial port at the local computer and disable any

service that uses that port.

2. Unless an APC smart-signaling cable (940-0024 or 940-

1524) is already connected to the selected port, connect

the smart-signaling cable that came with the Management

Card to the selected port and to the serial port at the

Management Card’s UPS or chassis.

3. Run a terminal program (such as HyperTerminal) and

configure the selected port for 2400 bps, 8 data bits, no

parity, 1 stop bit, and no flow control, and save the

changes.

4. Press

ENTER

to display the User Name prompt.

5. Use apc for the User Name and Password.

6. See “Control console” on page 16 to finish the

configuration.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Apc Network Management Card AP9617 Manuel d'utilisateur Page 14