APC Switched Rack Power Distribution Unit (PDU) Guide de l'utilisateur télécharger pdf (Page 18)

®®

USER’S GUIDE

switched rack pdu

Local access to the control console

You can use a local computer that connects to the Switched Rack PDU

through the serial port on the front of the unit.

1. Select a serial port at the local computer, and disable any service

which uses that port.

2. Use the supplied serial cable (940-0144) to connect the selected port

to the RJ-12 serial port on the front of the Switched Rack PDU.

3. Run a terminal program (such as HyperTerminal) and configure the

selected port for 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow

control. Save the changes.

4. Press

ENTER twice to display the User Name prompt.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 92 93

Pas de commentaire

APC Switched Rack Power Distribution Unit (PDU) Guide de l'utilisateur Page 18