APC 66097 Manuel d'installation télécharger pdf (Page 22)

Page 22 - 34003602EN/AB

2. Installation

Configuring the RAUZ card for Galaxy

The settings proposed below comply with the recommended configuration (see section "Single-unit type installation").

They must be made before installing and commissioning the PowerServices TelPac external unit. The serial link format

and the slave number should be set using UPS Tuner or Soft-Tunor.

COM2 COM1

OUVERT-FERME

RAUZ 6739856

Also check that the XC11 jumper at the edge of the GTCZ (or GT2Z) card is mounted in the JBUS position.

The card has a mark printed on it to identify the position.

Configuration

for Galaxy

Default configuration of the card

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

APC 66097 Manuel d'installation Page 22