APC Rack PDU, Metered, Zero U, 5.7kW, 120V Guide de l'utilisateur télécharger pdf (Page 18)

14 Metered Rack Power Distribution Unit

Control console

After you log on at the control console, as

described in “Local access to the control console”

on page 12 or “Remote access to the control

console” on page 13:

1. Choose Network from the Control Console

menu.

2. Choose TCP/IP

from the Network menu.

3. If you are not using a BOOTP or DHCP server

to configure the TCP/IP settings, select the

Boot Mode menu. Select Manual boot mode,

and then press

ESC to return to the TCP/IP

menu. Set the System

IP, Subnet Mask, and

Default Gateway address values.(Changes

will take effect when you log off.)

4. Press

CTRL+C to exit to the Control Console

menu.

5. Log off (option 4 in the Control Console

menu).

Note

If you disconnected a cable during the

procedure described in “Local access

to the control console” on page 12,

reconnect that cable and restart the

associated service.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

APC Rack PDU, Metered, Zero U, 5.7kW, 120V Guide de l'utilisateur Page 18