APC AP9290 Fiche technique télécharger pdf (Page 62)

USER’S GUIDE

Vertical Console Port Server

port set <port> [-f <flow-control>] - Set the flow control parameters.

This value is specified as a plus sign-separated ( + ) list of options. The

flow-control options are:

• ixon - Enable XON/XOFF flow control on output

• ixany - Enable any character to restart output

• ixoff - Disable XON/XOFF flow control on input

• crtscts - Enable RTS/CTS (hardware) flow control

port set <port> [-o <options>] - Set the port communication options.

This value is specified as a plus sign-separated ( + ) list of options. Port

communication options are:

• cstopb - Set two stop bits instead of one.

• hupcl - Lower modem control lines after the last process closes the

device (hangs up).

• striphigh - Remove the high bit from all data coming from this

console and all clients connected to this console before processing.

port set <port> [-n <port-name>] - Set the name of the specified port.

port set <port> [-m <motd>] - Set the message of the day that will be

displayed when a user logs into the port.

port set <port> [-t <idletimeout>] - Set the idle timeout for the port.

port set <port> [-i <idlestring>] - Set the string to be sent to the port

after the idle timeout has expired.

port set <port> [-k <break-seq-number>] - Set the break sequence sent

with the ‘l0’ port mode command.

port set <port> [-a <accessmode>] - Set the remote access mode for

this port to either Telnet or SSH.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 112 113

Pas de commentaire

APC AP9290 Fiche technique Page 62