APC ACRD200 Spécifications télécharger pdf (Page 24)

InRow Fluid Cooled RD Installation16

Positioning the Equipment

Remove the compressor shipping bracket

Caution: Failure to complete the following steps may result in equipment damage and will void

your warranty.

The compressor is secured by a bracket to prevent damage during shipping. This bracket must be

removed before you apply power to the equipment.

1. Remove two T30 Torx screws from the bracket as shown. Save the screws for possible future use.

2. Remove the bracket and save for possible future use.

na2691a

Remove screws

Remove bracket

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Pas de commentaire

APC ACRD200 Spécifications Page 24