APC Rack PDU, Metered, Zero U, 5.7kW, 120V Guide de l'utilisateur télécharger pdf (Page 7)

Metered Rack Power Distribution Unit 3

Mounting options

You can install the PDU in one of two ways: using

toolless mounting pegs (provided) or mounting

brackets (provided). The 1-U and 2-U horizontal

PDUs must be mounted using the horizontal

mounting brackets.

Vertical mounting.

• To install the PDU using the toolless mounting

method, install it in the rear of the NetShelter

VX or SX Enclosure, in the cable channel

directly behind the rear vertical mounting rails.

• To install the PDU using the mounting

brackets, install it on a vertical mounting rail

on your rack or enclosure.

Horizontal mounting.

To install the PDU using the horizontal mounting

brackets, install the brackets on the PDU and then

attach the PDU to the rack using cage nuts

(provided with your enclosure).

Toolless mounting

1. Slide both mounting pegs into the holes

located in the channel in the rear panel of the

enclosure.

2. Snap the PDU into place by pushing it down-

ward until it locks into position.

Note

You can mount two PDUs on one side

of the enclosure by using the toolless

mounting method.

pdu0119b

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Pas de commentaire

APC Rack PDU, Metered, Zero U, 5.7kW, 120V Guide de l'utilisateur Page 7