APC RAID Subsystem SCSI-SATA II Guide de l'utilisateur télécharger pdf (Page 27)

Monitoring Your SS2460

96-00290-001 Rev. A1 DataDirect Networks StorageScaler 2460 User Guide | 21

3.3 Monitoring the Disk Drives

Each disk drive carrier has three LEDs that indicate the status of the disk drive (Figure 27).

The LEDs are defined in Table 3.

NOTE :

If replacing a disk drive does not resolve a fault or failure indicated by the

Fault LED, replace the I/O controller (see Section4.2).

Table 3. Disk Drive Carrier LED Description

LED Color Description

Locate Beacon Blue Flashes - receiving Locate command

OFF - NOT receiving Locate command

Fault Amber ON - a detectable fault is present

OFF - no detectable fault is present

Status Green ON - power is applied to disk

Flashing - indicates disk activities

Figure 27. Disk Drive Carrier LEDs

Fault

Status

Locate

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Pas de commentaire

APC RAID Subsystem SCSI-SATA II Guide de l'utilisateur Page 27