APC NBRK0570 Spécifications télécharger pdf (Page 15)

9NetBotz Rack Monitor 450/550/570 Installation and Quick Configuration Manual

Connect an Alarm Beacon and Other Optional

Devices

1. Install an alarm beacon:

– Install the alarm beacon in a visible position either

on the roof of the rack or inside the rack.

– Route the alarm beacon cable to the appliance.

The alarm beacon cable may be extended to a

maximum of 100 m (328 ft), using RJ-45

couplings and standard CAT-5 cables.

– Connect the cable to the Alarm Beacon port.

2. Connect one device to the Voltage Output.

Caution: Relay Outputs can only be connected to Class 2 circuits.

3. Connect up to two devices to the Relay Outputs.

4. Connect a NetBotz Rope Leak Sensor to the Leak Rope port.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Pas de commentaire

APC NBRK0570 Spécifications Page 15