APC KVM1116P Manuel d'utilisateur télécharger pdf (Page 106)

KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 94

Ping

Check the network status of devices on the KVM switch installation with Ping.

1. Enter the IP Address or Host Name of the switch into the text entry box.

2. Click OK.

The ping results display in the Result panel.

Restore Values

Restore configuration changes made to the KVM switch to their original factory default values.

Clear Port Names. Removes names that have been assigned to the ports

Restore Default Values. Removes all changes made to the KVM switch (except for the Port Names),

including the Network Transfer Rate (on the Network page). The parameters return to the original

factory default settings.

Reset on exit

Place a check in the checkbox and click Apply to have the KVM switch reset itself and implement all the

new settings when you log out. (Wait approximately 30 to 60 seconds before logging back in.) If the

switch's IP Address is changed, the checkbox is automatically checked and the KVM switch will reset

when you log out. If the check mark is cleared before logging out, the changed IP settings will be ignored

and the original IP address settings will remain in effect.

Note: If the check mark was cleared, the changed IP settings are ignored, but still remain in

the network settings fields. The Reset on exit checkbox will automatically be enabled the

next time the page is opened. When the switch resets, the discarded IP settings will be used

by the switch. To avoid a problem, go to the network settings page and see that the correct IP

settings are in the fields.

The Download Tab

To download stand-alone AP versions of the Windows Client, the Java Client, and the Log Server to your

computer’s hard drive:

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 133 134

Pas de commentaire

APC KVM1116P Manuel d'utilisateur Page 106