APC Automatic Disconnect Switch Guide de l'utilisateur télécharger pdf (Page 95)

USER’S GUIDE

AUTOMATIC TRANSFER SWITCH

HTTP/HTTPS Port Configuration

HTTP Port Identifies the TCP/IP port used for communications by HTTP with the

Automatic Transfer Switch. The default is 80.

You can change the Port setting to the number of any unused port

between 5000 and 32768 to enhance the protection provided by User

Name and Password settings.

You must then use a colon (:) in the command line to specify the non-

default port number. For example, for a port number of 5000 and a

Automatic Transfer Switch IP address of 152.214.12.114, you would use

this command:

http://152.214.12.114:5000

HTTPS Port Identifies the TCP/IP port used for communications by HTTPS with the

Automatic Transfer Switch. The default is 443.

You can change the Port setting to the number of any unused port

between 5000 and 32768 to enhance the protection provided by User

Name and Password settings.

You must then use a colon (:) in the command line to specify the non-

default port number. For example, for a port number of 6502 and a

Automatic Transfer Switch IP address of 156.214.12.114, you would use

this command:

https://156.214.12.114:6502

Option Description

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 191 192

Pas de commentaire

APC Automatic Disconnect Switch Guide de l'utilisateur Page 95