APC PDRPPNX10-M Spécifications télécharger pdf (Page 14)

10 InfraStruXure System - Installation and Start-Up

Level the PDU, UPS, NetShelter, and XR

Battery Enclosures

Leveling feet are attached under the enclosure at each corner. The leveling feet can help provide a stable

base if the selected floor space is uneven, but they are not intended to compensate for a badly sloped

surface. To level the enclosure:

1. Use a 14-mm end of the open-ended wrench (provided) to extend the leveling foot until it makes

firm contact with the floor.

2. Repeat step 1 for each of the remaining leveling feet.

3. Use a level to determine which feet need further adjustment to level the enclosure. Adjust as

necessary.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Pas de commentaire

APC PDRPPNX10-M Spécifications Page 14