APC PDRPPNX10-M Spécifications télécharger pdf (Page 32)

28 InfraStruXure System - Installation and Start-Up

Route Data Cables to the InfraStruXure

Manager Hub (or Switch)

1. Connect a CAT-5 network cable (provided) to the network or 10BaseT ports on your APC

InfraStruXure devices. The following devices need to be connected:

2. Run the connected CAT-5 network cables through the data cable troughs to the InfraStruXure

Manager Hub (or Switch).

3. Connect each device’s network cable to any available station port in the InfraStruXure Manager

Hub (or Switch). Station ports are those with an x after the number (e.g. 2x).

Automatic Transfer Switch

Environmental Monitoring Unit

Rack PDU

Symmetra PX UPS

InfraStruXure PDU

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Pas de commentaire

APC PDRPPNX10-M Spécifications Page 32