APC PDPB150G6F Guide de l'utilisateur télécharger pdf (Page 23)

15User Guide InfraStruxure 150kVA Power Distribution Unit

boot

Access: Administrator only

Description: Allows the user to get/set the network startup configuration of the device, such as setting

boot mode (DHCP vs BOOTP vs MANUAL). Defines how the NMC will obtain its network settings,

including the IP address, subnet mask, and default gateway. Then configure the BOOTP or DHCP server

settings.

Example:

apc> boot

E000: Success

Boot Mode: manual

Non-Manual Mode Shared Settings

-------------------------------

Vendor class: <device class>

Client id: XX XX XX XX XX XX

User class: <user class>

After IP assignment: gotoDhcpOrBootp

DHCP Settings

-------------

Retry then stop: 4

DHCP cookie is: enable

BOOTP Settings

--------------

Retry then fail: never

On retry failure: prevSettings

Option Argument Description

-b

<boot

mode>

dhcp | bootp | manual Define how the TCP/IP settings will be configured when the NMC turns on,

resets, or restarts. See “TCP/IP Settings” on page 75 for information about

each boot mode setting.

-a remainDhcpBootp |

gotoDhcpOrBootp

After IP Assignment

-o stop | prevSettings On Retry Fail

-c enable | disable dhcp boot modes only. Enable or disable the requirement that the DHCP

server provide the APC cookie.

-s retry then stop # Note: 0 = never

-f retry then fail # Note: 0 = never

-v vendor class APC

-i client id The MAC address of the NMC, which uniquely identifies it on the network

-u user class The name of the application firmware module

The default values for these three settings generally do not need to be changed:

-v <vendor class>

-i <client id>

-u <user class>

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 115 116

Commentaires sur ces manuels

Pas de commentaire

APC PDPB150G6F Guide de l'utilisateur Page 23

Commentaires sur ces manuels