APC Network Management Card AP9617 Guide de l'utilisateur télécharger pdf (Page 102)

®®

USER’S GUIDE

network management card

Reset UPS Defaults

This option resets the UPS to use the default EEPROM values.

Configure Parallel UPS parameters (Silcon UPS only)

Use this option, available only in the Web interface, to identify up to nine

different Silcon UPSs that you can then access through the hyperlink, View

the refreshing status page, in the “Status for UPS” page.

Caution

Before you use this option, make sure that resetting the

EEPROM values will not adversely affect the load equipment or

any shutdown sequence.

Setting Definition

IP Address Identifies the IP address of the Management Card of the Silcon

UPS to be monitored.

Monitor Name Identifies by name the Silcon UPS to be monitored.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 189 190

Pas de commentaire

APC Network Management Card AP9617 Guide de l'utilisateur Page 102