APC Network Management Card AP9617 Guide de l'utilisateur télécharger pdf (Page 95)

®®

USER’S GUIDE

network management card

Control options for Silcon UPS. By default, no control options are

available for Silcon UPS.

To use control options for a Silcon UPS, you must enable the Accept

Remote Turn Off Commands option, available only in the control

console’s UPS Control menu and only when you use a local, serial

connection to access the control console.

When Accept Remote Turn Off Commands is enabled:

• Two control options, Turn UPS Off and Turn UPS Off Gracefully

options, become available for a Silcon UPS

• A Disable Remote Turn Off Commands option is available in the

UPS Control menu at the Web interface and control console, allowing

you to disable using the Management Card to turn off the Silcon UPS

To use a serial connection, see Local access to the control

console.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 189 190

Pas de commentaire

APC Network Management Card AP9617 Guide de l'utilisateur Page 95