APC Network Management Card AP9617 Guide de l'utilisateur télécharger pdf (Page 49)

®®

USER’S GUIDE

network management card

Telnet/SSH

Use the Telnet/SSH option to perform the following tasks:

• Enable or disable Telnet or the Secure SHell (SSH) protocol for remote

control console access.

– While SSH is enabled, you cannot use Telnet to access the control

console.

– Enabling SSH enables SCP automatically.

– Do not enable both versions of SSH unless you require that both

be activated at the same time. (Security protocols use extensive

processing power.)

• Configure the port settings for Telnet and SSH.

• Select one or more data encryption algorithms for SSH, version 1, SSH

version 2, or both.

• In the Web interface, specify a host key file previously created with the

APC Security Wizard and load it to the Management Card.

See also

To use FTP to download configuration files, see the Management

Card Addendum (./doc/addendum.pdf) on the APC Network

Management Card utility CD.

When SSH is enabled and its port and encryption ciphers

configured, no further configuration is required to use

SCP. (SCP uses the same configuration as SSH.)

To use SSH, you must have an SSH client installed. Most

Linux and other UNIX

platforms include an SSH client as

part of their installation, but Microsoft

Windows operating

systems do not. SSH clients are available from various

vendors.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 189 190

Pas de commentaire

APC Network Management Card AP9617 Guide de l'utilisateur Page 49