APC NetBotz 200 Guide de l'utilisateur télécharger pdf (Page 14)

USER’S GUIDE

NetBotz Rack Monitor 200

Control Console

How to Log On

Overview

You can use either a local (serial) connection or a remote (Telnet or SSH) connection

with a computer on the same network (LAN) as the Main Module (Rack Monitor 200) to

access the control console.

Use case-sensitive User Name and Password entries to log on (by default, apc and

apc for an Administrator, or device and apc for a Device Manager, which is the same

user account as Device User in the Web interface). A Read-Only User has no access to

the control console.

Remote access to the control console

An Administrator can access the control console through Telnet or SSH. Telnet is

enabled by default. Enabling SSH automatically disables Telnet.

To enable or disable these access methods:

• In the Web interface, on the Administration tab, select Network on the top menu

bar, then the access option under Console on the left navigation menu.

• In the control console, choose the Network menu, then the Telnet/SSH option.

Telnet for basic access. Telnet provides the basic security of authentication by user

name and password, but not the high-security benefits of encryption.

If you cannot remember your user name or password, see

Recovering From a Lost Password.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 124 125

Pas de commentaire

APC NetBotz 200 Guide de l'utilisateur Page 14