APC NetBotz 200 Guide de l'utilisateur télécharger pdf (Page 45)

USER’S GUIDE

NetBotz Rack Monitor 200

3. Enter data in fields. If you chose Name or Location, include wildcard

characters.

4. Click Apply, then click Finish.

If wildcards are used during a mass configuration and then you make a

change to your system upon which a wildcard character was based (for

example, redefining the module location), you will have to repeat the

mass configuration for the affected sensors.

Wildcard

Character

Description

The identification number of the Expansion Module to which the sensor is

connected or MM for all remote sensors or sensors connected to the

Main Module.

The port number, from 1 to 6, for sensors connected to a universal sensor

port, or for remote sensors, a number from 1 to 8, as defined by the

remote sensor's DIP switch settings.

The Location field of the module to which the sensor is connected.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 124 125

Pas de commentaire

APC NetBotz 200 Guide de l'utilisateur Page 45