APC NetBotz 200 Guide de l'utilisateur télécharger pdf (Page 23)

USER’S GUIDE

NetBotz Rack Monitor 200

Web Interface

Introduction

Overview

The Web interface provides options to manage the Main Module (Rack Monitor 200),

the Rack Sensor Pod 150 connected to the Main Module, and other supported devices.

Supported Web browsers

You can use Microsoft

Internet Explorer

(IE) 5.5 and higher (on Windows

operating

systems only), Firefox, version1.x, by Mozilla Corporation (on all operating systems), or

Netscape

7.x and higher (on all operating systems) to access the Main Module

through its Web interface. Other commonly available browsers also may work but have

not been fully tested by APC.

In addition, the Main Module cannot work with a proxy server. Therefore, before you

can use a Web browser to access the Web interface, you must do one of the following:

• Configure the Web browser to disable the use of a proxy server for the Main Module.

• Configure the proxy server so that it does not proxy the specific IP address of the

Main Module.

See Web (Administration>Network>Web>options) for information on how to

select, enable, and disable the protocols that control access to the Web

interface and to define the Web-server ports for the protocols.

To use the Web interface, it is not required that you enable JavaScript

for

your Web browser. It is recommended, however, for optimal functioning of the

interface.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 124 125

Pas de commentaire

APC NetBotz 200 Guide de l'utilisateur Page 23