APC NetBotz 200 Guide de l'utilisateur télécharger pdf (Page 38)

USER’S GUIDE

NetBotz Rack Monitor 200

If communication is lost to a device or if a temperature sensor’s rate-of-change is

exceeded, in addition to an alarm, a Reset Alarms link will appear.

To clear a device disconnected (lost comm) or rate-of-change alarm: Click the

Reset Alarms link if, for example, you intentionally disconnected a sensor or you want

to acknowledge a rate of change. The Administration tab’s General page appears

where you can reset the alarm.

System View page

Use the System View page to view all sensors currently connected to the system and

the status of outputs (beacon, relay, and switched outlet).

For additional details on how to clear the alarm, see How to Reboot, Reset

Settings, and Clear Alarms (Administration>General>Reset/Reboot).

If you have a Sensor Disconnected alarm and did not intentionally disconnect

a sensor, see Device Disconnected (or Lost Comm) Alarms for

troubleshooting details.

To view the most recent data from each sensor, see Temperature & Humidity

page and Dry Contact Inputs page.

Any sensors with a Sensor Disconnected alarm will not be displayed in the

System View page.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 124 125

Pas de commentaire

APC NetBotz 200 Guide de l'utilisateur Page 38