APC NetBotz 200 Guide de l'utilisateur télécharger pdf (Page 91)

USER’S GUIDE

NetBotz Rack Monitor 200

Administration: General Options

Identification (Administration>General>Identification)

Define values for the Name (the device name), Location (the physical location), and

Contact (the person responsible for the device) used by the Main Module’s SNMP

agent. These settings are the values used for the MIB-II sysName, sysContact, and

sysLocation Object Identifications (OIDs).

Set the Date and Time

Method (Administration>General>Date & Time>mode)

Set the time and date used by the Main Module. You can change the current settings

manually, or through a Network Time Protocol (NTP) Server.

• Manual: Do one of the following:

– Enter the date and time for the Main Module.

– Select Apply Local Computer Time to match the date and time settings of the

computer you are using, and click Apply.

• Synchronize with NTP Server: Have an NTP Server define the date and time for the

Main Module.

For more information about the MIB-II OIDs, see the PowerNet SNMP

Management Information Base (MIB) Reference Guide provided on the

NetBotz Rack Monitor 200 Utility CD and on the APC Web site,

www.apc.com.

Setting Definition

Primary NTP Server Enter the IP address or domain name of the primary NTP server.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 124 125

Pas de commentaire

APC NetBotz 200 Guide de l'utilisateur Page 91