APC NetBotz 200 Guide de l'utilisateur télécharger pdf (Page 50)

USER’S GUIDE

NetBotz Rack Monitor 200

Switched Outlet page

Select the Outputs tab and then the top menu item Switched Outlet to configure the

switched outlet. Enter the name and location in the appropriate fields. Set the normal

state of the outlet, on or off.

To change the state of the outlet manually, select the setting in the Control field.

To map a device alarm to activate an outlet: The outlet can only be activated by the

alarm states of sensors on the Main Module.

1. In the section Mapping: Alarm Reaction, select the alarm states that will

activate the outlet.

2. By default, all sensors connected to the Main Module are mapped to activate

the switched outlet when in an abnormal state. Click the name of the abnormal

state to view the sensors connected to the module.

3. Select devices to include in the alarm. Any selected device, in its abnormal

state, activates the outlet.

4. Click Apply.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 124 125

Pas de commentaire

APC NetBotz 200 Guide de l'utilisateur Page 50