APC NetBotz 200 Guide de l'utilisateur télécharger pdf (Page 63)

USER’S GUIDE

NetBotz Rack Monitor 200

Web (Administration>Network>Web>options)

Option Description

access To activate changes to any of these selections, log off from the Main Module:

• Disable: Disables access to the Web interface. (You must use the control console

to re-enable access. Select Network and Web/SSL/TLS. For HTTP access, select

Access and Enabled. For HTTPS access, also select Web/SSL and Enabled.)

• Enable HTTP (the default): Enables Hypertext Transfer Protocol (HTTP), which

provides Web access by user name and password, but does not encrypt user

names, passwords, and data during transmission.

• Enable HTTPS: Enables Hypertext Transfer Protocol over Secure Sockets Layer

(HTTPS) to provide Web access. Secure Sockets Layer (SSL) encrypts user

names, passwords, and data during transmission, and authenticates the Main

Module by digital certificate. When HTTPS is enabled, your browser displays a

small lock icon.

See “Creating and Installing Digital Certificates” in the Security Handbook on the

NetBotz Rack Monitor 200 Utility CD to choose among the several methods for

using digital certificates.

HTTP Port: The TCP/IP port (80 by default) used to communicate by HTTP with the

Main Module.

HTTPS Port: The TCP/IP port (443 by default) used to communicate by HTTPS

with the Main Module.

For either of these ports, you can change the port setting to any unused port from

5000 to 32768 for additional security. Users must then use a colon (:) in the address

field of the browser to specify the port number. For example, for a port number of

5000 and an IP address of 152.214.12.114:

http://152.214.12.114:5000

https://152.214.12.114:5000

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 124 125

Pas de commentaire

APC NetBotz 200 Guide de l'utilisateur Page 63